Books/Papers Published

Apply Online

1. Short Term Course

2. Jobs in PWD (B&R)

Faculty Login


 
 
 
Books/Papers Published - Curriculum Development Centre

PAPERS BY CDC FACULTY DURING LAST 10 YEARS

Dr. KM Rastogi, Prof. & Head, Curriculum Development Centre

1.    Paper presented in Seminar and Conferences:

  1. Role of Industry-Institute Interaction in Curriculum Development Process’ during seminar on ‘Resource sharing must for survival and success of institute and Industry organized by DTE, HP on Ist December 2001.
  2. ‘Developing Healthy Work-Culture in Technical Institutions’ jointly authored with Dr. LN Mittal during 31st ISTE Annual Convention held at Bhubneshwar w.e.f. 27-29 December, 2001
  3. “Evaluation Framework for Vocational Training Programmes” National Seminar on Vocational Education and Training held at TTTI, Chandigarh from 5-7 September, 2003
  4. “Continuing Education Needs for Hospital Engineering Manpower in 21st Century”, National Seminar on Emerging Trends in Hospital Engineering on 4th November, 2003, at PGIMER, Chandigarh.
  5. “Role of teacher in Effective Implementation of curriculum in polytechnics     in the National workshop on State Board of technical Education – planning and management for Excellence” held at NITTTR, Chd from 26-30 August, 2003
  6. Assessment Framework for Vocational Training Programme “ in National Seminar on Vocational Education and Training from 6-7 September, 2003 at NITTTR, Chandigarh
  7. “Effective Use of ICT in Curriculum Implementation”, National Seminar on ICT Enabled Education held at NITTTR, Chandigarh in November 2004.
  8. ‘Management of Curriculum Development for Technical and Vocational Education and Training (TVE&T) in National workshop on State Board of Technical Education on 6-7 September, 2004 at NITTTR, Chandigarh
  9. Developing Competency Based Curriculum for Technical Programmes’ presented in National Symposium on Engineering Education organized by IISc, Bangalore from 25-26 February, 2005
  10. ‘Development of Generic Skills in Technical Manpower of 21st Century’ in the National Seminar held at NITTTR, Chandigarh from 17-18 November, 2006 
  11. ‘Integrated Curriculum, a comprehensive curriculum innovation for 21st Century’ in the National Seminar on ‘Curriculum Innovations in Technical and Vocational Education’ from 27-28 February, 2007 at NITTTR, Chd
  12. ‘Curriculum Evaluation’; Pragmatic approach presented at ISTE 37” Annual convention held at Manipal Institute of Technology, Manipal from 17-19 December, 2007
  13. Interdisciplinary programme and courses: Scientific Approach at International conference on Higher Education (ICHE 07) at Indian Institute of Science, Banglore on 12-14 July, 2007
  14. Enhancing Employability through innovative curriculum in National Seminar on Finishing Schools held at NITTTR, Chandigarh on 21`-22 October, 2008
  15. Knowledge Management for Educational practices and policy making in technical education in regional workshop on ‘Creation and Dissemination of Knowledge’ organized by International Management Institute, New Delhi at NITTTR, Chandigarh on 15-17 October, 2008

2. Articles published in Journals                 

  1. Need analysis for diploma programme in Wood Technology in J&K State : A case study published in the Indian Journal of Technical Education. Vol. 27 No. 2 June, 2004
     
  2. Life Long Learning Paradigm : A paper published in the Indian Journal of Engineering Education Vol. 30 No. 4, October-December, 2007
  3. Innovative Structure for Developing an Integrated  Curriculum – Using Advance Applied Academic Approach (A3), published in the Indian Journal of Engineering Education Vol. 22 No.3, 2009
  4. Interdisciplinary/Integrated curriculum: Panacca for resurrecting Technical Education in India, published in the Indian Journal of Technical Education. Vol. 32  No. 2 April-June, 2009

 3. Books

  1. Experiments in Basic Electrical Engineering. Jointly authored with Dr. SK Bhattacharya and Published by New Age International (P) Ltd., New Delhi, 1997
  2. Basic Electricity (Hindi) jointly authored with other experts at Curriculum Development Centre, Allahabad Polytechnic, Allahabad and published by Saroj Prakashan, Allahabad, 1975
  3. Electrical Machines-I: Work book, published by TTTI, Chandigarh, 1986
  4. Contactor Control circuits – Student Manual published by TTTI, Chandigarh, 1988

4.    Research Contribution

  1. Thesis on ‘A study of Organizational Effectiveness of Polytechnics in selected states of Northern India’ in December, 2000
  2. Guided and supervised Independent study and ME thesis of one ME (I&C) student in the area of ‘Microprocessor Based Data Acquisition system’ during 2000-2001
  3. Guidance to Ph.D thesis on ‘Developing a model for Integrated Curriculum Design for professional courses using automobile engineering as a case study.

RESEARCH AND DEVELOPMENT

Few of the important research studies carried out by the department are as follows during last 5 years:

  1. Research study on Modernization of Labs and Libraries of the Polytechnics of J&K State based on the curriculum requirements
  2. Designing of Model Curriculum for 3 year diploma progrmme in Mechanical Engineering for all states.
  3. Research study on Effective Curriculum Implementation for the state of Haryana
  4. A snap study on implementation of MPECS in project polytechnics of J&K State
  5. Research study on ‘Utilization of Resources in projects polytechnics in J&K State’ for NPIU.
  6. A study on ‘Ascertaining causes of High failure rate in first year of diploma examinations in Haryana Polytechnics’
  7. Future Expectations of Construction Industry from passouts of diploma programme in Civil Engineering – A case study

VIDEO FILM

  1. Effective Curriculum Implementation
  2. Healthy Work Culture
  3. Concept of Use

Prof. PK Singla, Associate Professor, Curriculum Development Centre

1.  Paper presented in Seminar and Conferences:

  1. Safety in Construction Industry in the Seminar on “Industrial Safety”, organized by The Institute of Indian Foundry-men, Chandigarh Chapter and with ITI, Chandigarh on 12th April, 2001
  2. ‘Guidelines and Space Requirements/Standards for Barrier Free Environment for Disable’ in Regional Workshop on “Planning and Implementing Scheme of PWD’s (Persons with Disability)”, organized by TTTI, Chandigarh on 23-24 May, 2001
  3. ‘Role of Industry-Institute Interaction in Curriculum Process’ in Seminar on “Resource Sharing – A Must for Survival and Success of Industry and Institute”, organized by Directorate of Technical Education, Vocational and Industrial Training, Sundernagar, H.P. on 1st December, 2001
  4. Co-authored a paper on ‘An Integrated Approach for Student Evaluation in Vocational programmes’ presented in the National Seminar on ‘ Vocational Education & Training’ on 6-7 September, 2003 held at NITTTRI, Chandigarh.
  5. Co-authored a paper on ‘Developing Competency based curriculum for Technical Programmes’ presented in the National Symposium on Engineering Education organized by  IISc, Banglore from 25-26 February, 2005.
  6. Presented a paper on ‘Management of Evaluation in an Education Programme in National Conference on Management of Technical Education in New Millennium on November 16-18 , 2005 held at NITTTR, Chandigarh
  7. Presented a paper on ‘Drinking water Pollution in Haryana and its impact on Human health in National Seminar on empowering the Masses through Technology Application and skill Training on 1-2 December, 2005 held at NITTTR, Chandigarh
  8. Presented a paper on ‘Empowering Youth through Developing Vocational Skills – A case study of CCET, Chandigarh in National Seminar on Empowering the Masses through Technology Application and Skill Training on 1-2 December, 2005 held at NITTTR, Chandigarh
  9. Presented a paper on ‘Learning through projects a Research Journal New Horizons published by MCM DAV college3 for Women, Sector 36, Chandigarh in January, 2006
  10. Presented a paper on ‘Modulation of Noise Attenuation with Distance Due to Atmosphere Absorption – a study in All India Seminar on air pollution and health Impacts (AISAPHI) organized by the Institution of Engineers (India) Roorkee Local Centre, IIT Roorkee in February 23-24, 2006
  11. Presented a paper on ‘An Innovative approach in Critical Thinking Curriculum for Technical Institution in National conference on Technological management by Gian Jyoti Institute of Management and Technology, Mohali in March, 25, 2006
  12. Presented a paper on ‘Introducing Flexibility in Management Systems’ in National conference on Technological management by Gian Jyoti Institute of Management and Technology, Mohali in March, 25, 2006
  13. ‘Study of Machining parameters in Spark Erosion Machining of Hot die Steel with copper and Brass Electrode’ in National Conference on Recent Trends in Engineering and application of computational Techniques (REACT 2006) at Bhai Gurdas Institute of Engineering and Technology, Sangur from 5-6 April, 2006
  14. Presented a paper on ‘ An innovative approach to value-based curriculum in the National Seminar on ‘Curriculum Innovations in Technical and Vocational Education’ from 27-28 February, 2007 at NITTTR, Chd
  15. Presented a paper on ‘ Curriculum Development Model for Technical Education programmes- State of Art and Innovations’ in the National Seminar on ‘Curriculum Innovations in Technical and Vocational Education’ from 27-28 February, 2007 at NITTTR, Chd
  16. Presented a Theme Paper on ‘Curriculum Innovations’ in the National Seminar on ‘Curriculum Innovations in Technical and Vocational Education’ from 27-28 February, 2007 at NITTTR, Chd
  17. Presented a paper on ‘Developing Professional Ethics among the Technical Students through curriculum’ presented at International Conference on Higher Education ( ICHE-07) at Indian Institute of Science, Banglore on July 12-14, 2007
  18. Presented a paper on ‘An Integrated Curriculum Evaluation Model for Technical Education Programme; presented at International Conference on Higher Education ( ICHE-07) at Indian Institute of Science, Banglore on July 12-14, 2007
  19. Inclusive Education for all – Role of Legislation and Technology in National conference on Rehabilitation, Education and Vocational and Technical Training for Disabled organized at NITTTR, Chandigarh from 15-16 November, 2007
  20. Presented a paper on ‘Leadership – The unconventional approach’ presented at 3rd National Conference on Managing for Organizational Excellence organized by GJ-IMT, Mohali on December 1, 2008

2. Books

  1. Text Book on English & Communication Skills (Book-1) jointly authored with other experts and published by M/S Abishekh Publisher, Sector 17, Chandigarh, 2005
  2. Text Book on English & Communication Skills (Book-2) jointly authored with other experts and published by M/S Abishekh Publisher, Sector 17, Chandigarh, 2005
  3. Text Book on English & Communication Skills (Book-3) jointly authored with other experts and published by M/S Abishekh Publisher, Sector 17, Chandigarh, 2008
  4. Text Book on Applied Mechanics jointly authored with other experts and published by M/S Abishekh Publisher, Sector 17, Chandigarh, 2006
     

Shri TN Thukral, Research Assistant, Curriculum Development Centre

1.   Paper presented in Seminar and Conferences:

  1. Co-authored a paper on ‘Information Technology its Growth and impact” was presented in the National Seminar on ‘Curriculum Challenges for Technician Education’ held at NITTTR, Chandigarh on 8-10 October, 2000.
  2. Co-authored a paper on ‘Sustaining Curriculum Development Effort in States – Roles of TTTIs’ in National Seminar on Impact of World Bank Assisted Project on Polytechnic Education system’ on 6-7 September, 2001
  3. “Information Technology – Its impact and role in HRD” presented in National Seminar on Curriculum Challenges for Technician Education held at NITTTR, Chandigarh and was published in Proceedings of seminar.
  4. Paper based on study conducted ‘To identify the problems faced by polytechnic students during instructional process was presented in National Seminar on Curriculum Challenges held at NITTTR, Chandigarh and was published in proceedings.
  5. Co-authored a paper on ‘Effective Implementation on Curriculum’ in the state of Punjab – A case study’ and presented in the National Seminar held at NITTTR, Chandigarh
  6. Co-authored a paper on ‘Competency Based Evaluation” in National Seminar on Vocational Education and Training held at NITTTR, Chandigarh on 6-7 September, 2003
  7. Co-authored a paper on ‘Technical Education and presented in Symposium on ‘Polytechnic Education Future Directions’ from 16-17 August, 2004 held at NITTTR, Chandigarh
  8. Co-authored a paper on ‘Management of Curriculum Development for Technical and Vocational Education and Training (TVE&T) in National workshop on State Board of Technical Education on 6-7 September, 2004
  9. Presented a paper on ‘Thematic Curriculum’ in National Seminar on Curriculum Innovations in Technical and Vocational Education held at NITTTR, Chandigarh on 27-28 February, 2007
  10. Co-authored a paper on ‘Finishing Schools presented in the National Seminar on Finishing School in Engineering Education – concept, Design and Impact on 21-22 October, 2008 held at NITTTR, Chandigarh.